Solder Wave masking dots

APT Solder Wave masking dots are pre-cut paper masking dots and discs made from smooth crepe paper with a natural rubber/resin adhesive. These pressure-sensitive masking tape discs provide quick stick and holding power for wet spray painting and low-temperature powder coating within the listed temperature rating.

• Backing: smooth crepe paper
• Adhesive: natural rubber/resin
• Total thickness: 7.5 mil
• Listed temperature rating: 325°F / 163°C

Paper masking dot specifications

Paper masking disc applications

• Wet spray painting
• Low-temperature powder coating within the listed rating
• General industrial masking of circular areas

Designed for clean removal after processing. Confirm suitability for your surface, exposure time and processing conditions. Not recommended for outdoor exposure.

Choose a paper masking dot diameter

Available diameters: 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1.5 and 2 inches.

• 1/8, 1/4, 3/8, 1/2 and 5/8 inch: 5,000 discs per roll
• 3/4 inch: 4,000 discs per roll
• 7/8, 1 and 1.5 inches: 2,000 discs per roll
• 2 inches: 500 discs per roll

Split-back liners and custom sizes are available on request. Contact us for sizes beyond the listed options or a larger order.

Compare paper, polyester and polyimide masking dots for different coating and electronics applications.