Adhesive Tape News

AI-generated application image of an inspector peeling a green polyester masking dot from a powder-coated steel bracket to check the masking boundary.

Why Masking Dots Lift, Leak or Leave Residue—an...

Masking dots that lift, allow coating underneath or leave adhesive residue can lead to rework and rejected parts. The symptom is a starting point for investigation, not proof that the...

Why Masking Dots Lift, Leak or Leave Residue—an...

Masking dots that lift, allow coating underneath or leave adhesive residue can lead to rework and rejected parts. The symptom is a starting point for investigation, not proof that the...

AI-generated application image of a technician placing amber polyimide masking dots on a PCB before conformal coating.

Polyimide Masking Dots for PCB Conformal Coatin...

Polyimide masking dots can protect circular keep-out areas during PCB conformal coating. A successful mask must fit the board drawing, stay in place through the coating cycle and release without...

Polyimide Masking Dots for PCB Conformal Coatin...

Polyimide masking dots can protect circular keep-out areas during PCB conformal coating. A successful mask must fit the board drawing, stay in place through the coating cycle and release without...

What Is Gaffer Tape Used For? Stage, Film and Photography Guide

What Is Gaffer Tape Used For? Stage, Film and P...

Explore gaffer tape uses in theatre, film and photography, with a practical workflow for surface testing, temporary cable securing and removal.

What Is Gaffer Tape Used For? Stage, Film and P...

Explore gaffer tape uses in theatre, film and photography, with a practical workflow for surface testing, temporary cable securing and removal.

Gaffer Tape vs. Duct Tape: Which Should You Use?

Gaffer Tape vs. Duct Tape: Which Should You Use?

Compare gaffer tape and duct tape for temporary stage and studio work, including matte finish, removal, surface testing and application limits.

Gaffer Tape vs. Duct Tape: Which Should You Use?

Compare gaffer tape and duct tape for temporary stage and studio work, including matte finish, removal, surface testing and application limits.

AI-generated application image of a gloved hand brushing clear epoxy into fine-woven fiberglass tape along an inside plywood boat seam.

How to Use Woven Fiberglass Tape with Epoxy for...

Plan a woven fiberglass tape and epoxy application for seams and corners, from choosing materials and pre-fitting tape to wet-out and curing checks.

How to Use Woven Fiberglass Tape with Epoxy for...

Plan a woven fiberglass tape and epoxy application for seams and corners, from choosing materials and pre-fitting tape to wet-out and curing checks.

AI-generated application image comparing narrow and wide fine-woven fiberglass tape positioned over plywood seams in a boatbuilding workshop.

Woven Fiberglass Tape: Choosing 2-Inch vs. 6-In...

Compare 2-inch and 6-inch woven fiberglass tape for seams and corners, with width measurements, roll coverage and repair-planning checks.

Woven Fiberglass Tape: Choosing 2-Inch vs. 6-In...

Compare 2-inch and 6-inch woven fiberglass tape for seams and corners, with width measurements, roll coverage and repair-planning checks.