Advanced Polymer Tape Inc.
Woven Fiberglass Tapes
Woven Fiberglass Tapes
Couldn't load pickup availability

APT woven fiberglass tape is a non-adhesive woven glass reinforcement for seams, corners and general repairs. Use it over epoxy fillets, on cedar strip canoes and in plywood stitch-and-glue boat construction with a suitable resin system. This white fiberglass woven tape is offered in 2-inch and 6-inch widths on 36-yard rolls.
Specifications
| Specification | Value |
|---|---|
| Material | Woven fiberglass (woven glass) |
| Adhesive | Non-adhesive; not self-sticking |
| Thickness | 0.127 mm (5 mil) |
| Color | White |
| Widths | 2 inches (50.8 mm) and 6 inches (152.4 mm) |
| Roll length | 36 yards (approximately 33 meters) |
| Tensile strength | 340 lbs/in |
| Listed fiberglass temperature resistance | Up to 1022°F (550°C); confirm exposure conditions with APT. This is not a temperature rating for a finished resin-bonded assembly. |
Our Woven Fiberglass Tape may be used as an alternative to:
| APT Product | Comparable Products |
|---|---|
| Woven Fiberglass Tape | · Raka 6 Ounce Fiberglass Tape · WEST SYSTEM 729 / 733 Glass Tape |
Product suitability may vary depending on application requirements. Confirm specifications before substitution.
Applications
- Reinforcing seams and corners with a suitable resin system.
- Reinforcement over epoxy fillets.
- Cedar strip canoe construction and repairs.
- Plywood stitch-and-glue boat construction and general fiberglass repairs.
The tape provides reinforcement rather than a pressure-sensitive bond. Select a compatible resin and follow its surface preparation, wet-out and curing instructions. The resin system, laminate design and service conditions determine the performance of the finished repair. For heat exposure, confirm suitability with APT before use; the listed fiberglass temperature resistance does not establish continuous-use limits or a fire certification.
Woven fiberglass tape questions
What is woven fiberglass tape used for?
Woven fiberglass tape reinforces seams, corners and repairs with a suitable resin system. Common applications include reinforcement over epoxy fillets, cedar strip canoes and plywood stitch-and-glue boats.
Is woven fiberglass tape self-adhesive?
No. APT Woven Fiberglass Tapes are non-adhesive and do not stick on their own. For bonded reinforcement, use a compatible resin system and follow its application and curing instructions.
Can woven fiberglass tape be used with epoxy?
It can be used for reinforcement over epoxy fillets and in epoxy-based boat construction and repairs. Confirm compatibility with your selected epoxy, wet out the reinforcement as directed and follow the resin manufacturer's preparation and cure requirements.
What widths and roll lengths are available?
APT offers 2-inch (50.8 mm) and 6-inch (152.4 mm) widths, each on a 36-yard roll (approximately 33 meters). Check the selected size for current availability.
Is woven fiberglass tape waterproof?
The woven tape alone is not a waterproof seal. Water resistance in a completed repair depends on the resin system, complete wet-out, curing and the design of the finished assembly.
What temperature can woven fiberglass tape withstand?
The product specification lists fiberglass temperature resistance up to 1022°F (550°C). Confirm temperature, exposure duration and operating conditions with APT before use. A resin-bonded repair must stay within the limits of its resin system and other components; the fiberglass figure is not a finished-assembly rating.
-
Free Shipping
Enjoy Free Shipping Over 75$
-
Hassle-Free Exchanges
If you are not happy with the product, ask us for a refund/exchange.