Points de masquage

Shop masking dots and masking discs in paper, polyester and polyimide for industrial painting, coating and electronics applications. These pre-cut masking tape dots cover circular areas without cutting individual pieces from a roll.

Choose a masking dot material

Material Applications Listed temperature rating
Paper masking dots Wet spray and low-temperature coating within the listed rating 325°F / 163°C
Polyester masking discs Powder coating and e-coating 400°F / 204°C
Polyimide masking dots PCB conformal coating and high-temperature electronics masking 500°F / 260°C

Select by process temperature, exposure time, surface and removal requirements. Confirm suitability under your actual processing conditions.

Diameters, roll quantities and custom sizes

Standard diameters range from 1/8 inch to 2 inches. Dots per roll vary by material and diameter; check the product options before ordering. Polyester and polyimide dots 3/8 inch or larger include a split-back liner; smaller split liners and custom sizes are available on request. Paper split-back liners are available on request.

Choose a masking dot material

Material Applications Listed temperature rating
Paper masking dots Wet spray and low-temperature coating within the listed rating 325°F / 163°C
Polyester masking discs Powder coating and e-coating 400°F / 204°C
Polyimide masking dots PCB conformal coating and high-temperature electronics masking 500°F / 260°C

Select by process temperature, exposure time, surface and removal requirements. Confirm suitability under your actual processing conditions.

Diameters, roll quantities and custom sizes

Standard diameters range from 1/8 inch to 2 inches. Dots per roll vary by material and diameter; check the product options before ordering. Polyester and polyimide dots 3/8 inch or larger include a split-back liner; smaller split liners and custom sizes are available on request. Paper split-back liners are available on request.